Wide range of high quality electrical building wires manufactured, designed and tested according to International and American standards.

Used in construction, commercial, industrial, residential and oil & gas projects, as branch circuits for wiring, lighting and earthing.

THHN / THWN | 600V

Specification:

• According to American standards, UL 83 & UL 1581

Conductor:

• 19 wire combination of round unilay stranded conductor provides more flexibility and optimal shape with less diameter.

Insulation:

• Thermoplastic PVC insulation suitable for 105 & 90 ºC dry and 75 ºC wet location. Wires are complying to vertical flame test requirements VW-1.

Jacketing:

• Polyamide Nylon over the PVC insulation provides an excellent protection against scratch, abrasion and resistance to oil and gasoline.

Special Requirement:

• UL LISTED upon request

XHHW / XHHW-2 | 600V

Specification:

• According to American standards, UL 44 & UL 1581 – (UL LISTED)

Conductor:

• 19 wire combination of round unilay stranded conductor provides more flexibility and optimal shape with less diameter.

Insulation:

• thermoseting XLPE insulation suitable for 90 ºC dry and 75 ºC wet location. Wires are chemical resistance and complying to flame and smoke requirment of UL 44 FT2/FH/Horizontal Flame.

Special Requirement:

• UL LISTED upon request

AWM – APPLIANCE WIRING MATERIAL | 600V, 105°C

Specification:

• Appliance Wiring Material type AWM according to American Standards UL 758 & UL 1581

Conductor:

• 19 wire combination of round uni-lay or semi-lay stranded conductor provides more flexibility and optimal shape with less diameter.

Insulation:

• Thermoplastic PVC insulation suitable for 105 ºC. Wires are complying to Horizontal Flame test and Vertical Flame test requirements VW-1. Colors & packing options are available upon request.

Special Requirement (upon request):

• Available as Solid conductor
• Copper tinned coating

CU/PVC | 600/1000V

Specification:

• Designation Type 6231. Flame Retardant to IEC 60332-1 Vertical Flame Propagation Test.

Conductor:

• Soft annealed copper according to BS EN 60228, Class 5 flexible conductor.

Insulation:

• Thermoplastic insulationThe insulation PVC shall be type PVC TI 1 70 °C as specified in BS EN 50363-3 and type PVC TI 3 90 °C as specified in BS EN 50363-3. Colors are available upon request.

Special Requirement (upon request):

• Max. Conductor Temperature 105 °C
• Oil and sunlight resistant
• Different packing options are available